Archive for January, 2023

Saturday, June 11, 2005

The intentions of Manchester United’s new owner, U.S. sports tycoon Malcolm Glazer, for the club have been revealed. Although spokespersons for Mr. Glazer (including his son) have stressed that nothing has been finalised, it appears that he intends to raise ticket prices, income, profits whilst capping spending on player transfers.

Mr. Glazer – who owns over 76.2% of the club’s shares through his investment company, Red Football – enraged fans when he started to accumulate shares earlier this year in an attempt to gain control of the what amounts to the world’s most successful football club. Manchester United has more fans, a higher market value, a more valuable and more widely recognised brand and is more profitable than any other football club in the world.

To gain control of the club, Glazer used borrowed money and he is set to transfer this money to the club’s books when he gains full control. The borrowed money will result in large interest repayments – pushing the clubs finances into the red. To counter this Mr. Glazer apparently intends to raise ticket prices by about 50% and to increase revenues by 52% to £245.6m (from £161.5m this year) over the next five years. Apart from ticket price increases, this jump in revenue will be achieved by a 61% jump in match day sales, a 13% increase in media sales, and a 76% rise in sales of merchandise and other commercial activities.

As part of his plans, expenditure on player transfers will be capped at just £25m a year. This is a very low figure for a English football club endeavouring to win domestic and European trophies. Seven years ago the club spent £28m on players, since then expenditure in England on players has increased hugely.

Retrieved from “https://en.wikinews.org/w/index.php?title=Glazer_caps_Manchester_United%27s_player_transfer_spending_at_£25m_a_year&oldid=851889”

OpenSync Interview – syncing on the free desktop

Posted by: Adminin Uncategorized
12
Jan

Friday, May 19, 2006

This interview intends to provide some insight into OpenSync, an upcoming free unified data synchronization solution for free software desktops such as KDE, commonly used as part of the GNU/Linux operating system.

Hi Cornelius, Armin and Tobias. As you are now getting close to version 1.0 of OpenSync, which is expected to become the new synchronisation framework for KDE and other free desktops, we are quite interested in the merits it can provide for KDE users and for developers, as well as for the Open Source Community as a whole. So there’s one key-question before I move deeper into the details of OpenSync:

What does OpenSync accomplish, that no one did before?

Cornelius:

First of all it does its job of synchronizing data like addressbooks and calendars between desktop applications and mobile devices like PDAs and cell phones.
But the new thing about OpenSync is that it isn’t tied to a particular device or a specific platform. It provides an extensible and modular framework that is easy to adopt for application developers and people implementing support for syncing with mobile devices.
OpenSync is also independent of the desktop platform. It will be the common syncing backend for at least KDE and GNOME and other projects are likely to join. That means that the free desktop will have one common syncing solution. This is something really new.

How do the end-users profit from using synching solutions that interface with OpenSync as framework?

Cornelius:

First, the users will be able to actually synchronize all their data. By using one common framework there won’t be any “missing links”, where one application can sync one set of devices and another application a different one. With OpenSync all applications can sync all devices.
Second, the users will get a consistent and common user interface for syncing across all applications and devices. This will be much simpler to use than the current incoherent collection of syncing programs you need if you have more than the very basic needs.

How does OpenSync help developers with coding?

Cornelius:

It’s a very flexible and well-designed framework that makes it quite easy for developers to add support for new devices and new types of data. It’s also very easy to add support for OpenSync to applications.
The big achievement of OpenSync is that it hides all the gory details of syncing from the developers who work on applications and device support. That makes it possible for the developers to concentrate on their area of expertise without having to care what’s going on behind the scenes.
I have written quite a lot of synchronization code in the past. Trust me, it’s much better, if someone just takes care of it for you, and that’s what OpenSync does.

Tobias:

Another point to mention is the python wrapper for opensync, so you are not bound to C or C++, but can develop plugins in a high level scripting language.

Why should producers of portable devices get involved with your team?

Cornelius:

OpenSync will be the one common syncing solution for the free desktop. That means there is a single point of contact for device manufacturers who want to add support for their devices. That’s much more feasible than addressing all the different applications and solutions we had before. With OpenSync it hopefully will become interesting for manufacturers to officially support Linux for their devices.

Do you also plan to support applications of OpenSync in proprietary systems like OSX and Windows?

Cornelius:

OpenSync is designed to be cross-platform, so it is able to run on other systems like Windows. How well this works is always a question of people actually using and developing for this system. As far as I know there isn’t a real Windows community around OpenSync yet. But the technical foundation is there, so if there is somebody interested in working on a unified syncing solution on Windows, everybody is welcome to join the project.

What does your synchronisation framework do for KDE and for KitchenSync in particular?

Cornelius:

OpenSync replaces the KDE-specific synchronization frameworks we had before. Even in KDE we had several separate syncing implementations and with OpenSync we can get replace them with a common framework. We had a more generic syncing solution in KDE under development. This was quite similar from a design point of view to OpenSync, but it never got to the level of maturity we would have needed, because of lack of resources. As OpenSync fills this gap we are happy to be able to remove our old code and now concentrate on our core business.

What was your personal reason for getting involved with OpenSync?

Cornelius:

I wrote a lot of synchronization code in the past, which mainly came from the time where I was maintaining KOrganizer and working on KAddressBook. But this always was driven by necessity and not passion. I wanted to have all my calendar and contact data in one place, but my main objective was to work on the applications and user interfaces handling the data and not on the underlying code synchronizing the data.
So when the OpenSync project was created I was very interested. At GUADEC in Stuttgart I met with Armin, the maintainer of OpenSync, and we talked about integrating OpenSync with KDE. Everything seemed to fit together quite well, so at Linuxtag the same year we had another meeting with some more KDE people. In the end we agreed to go with OpenSync and a couple of weeks later we met again in Nuernberg for three days of hacking and created the KDE frontend for OpenSync. In retrospect it was a very pleasant and straightforward process to get where we are now.

Armin:

My reason to get involved (or better to start) OpenSync was my involvement with its predecessor Multisync. I am working as a system administrator for a small consulting company and so I saw some problems when trying to find a synchronization solution for Linux.
At that point I joined the Multisync project to implement some plugins that I thought would be nice to have. After some time I became the maintainer of the project. But I was unhappy with some technical aspects of the project, especially the tight coupling between the syncing logic and the GUI, its dependencies on GNOME libraries and its lack of flexibility.

Tobias:

Well, I have been a KDE PIM developer for several years now, so there was no way around getting in touch with synchronization and KitchenSync. Although I liked the idea of KitchenSync, I hated the code and the user interface […]. So when we discussed to switch to OpenSync and reimplementing the user interface, I volunteered immediately.

Can you tell us a bit about your further plans and ideas?

Cornelius:

The next thing will be the 1.0 release of OpenSync. We will release KitchenSync as frontend in parallel.

Armin:

There are of course a lot of things on my todo and my wishlist for opensync. For the near future the most important step is the 1.0 release, of course, where we still have some missing features in OpenSync as well as in the plugins.
One thing I would really like to see is a thunderbird plugin for OpenSync. I use thunderbird personally and would really like to keep my contacts up to date with my cellular, but I was not yet able to find the time to implement it.

Tobias:

One thing that would really rock in future versions of OpenSync is an automatic hardware detection mechanism, so when you plugin your Palm or switch on your bluetooth device, OpenSync will create a synchronization group automatically and ask the user to start syncing. To bring OpenSync to the level of _The Syncing Solution [tm]_ we must reduce the necessary configuration to a minimum.

What was the most dire problem you had to face when creating OpenSync and how did you face it?

Cornelius:

Fortunately the problems which I personally would consider to be dire are solved by the implementation of OpenSync which is well hidden from the outside world and [they are] an area I didn’t work on 😉

Armin:

I guess that I am the right person to answer this question then 🙂
The most complicated part of OpenSync is definitely the format conversion, which is responsible for converting the format of one device to the format that another device understands.
There are a lot of subsystems in this format conversion that make it so complex, like conversion path searching, comparing items, detection of mime types and last but not least the conversion itself. So this was a hard piece of work.

What was the greatest moment for you?

Cornelius:

I think the greatest moment was when, after three days of concentrated hacking, we had a first working version of the KDE frontend for OpenSync. This was at meeting at the SUSE offices in Nuernberg and we were able to successfully do a small presentation and demo to a group of interested SUSE people.

Armin:

I don’t remember a distinct “greatest moment”. But what is a really great feeling is to see that a project catches on, that other people get involved, use the code you have written and improve it in ways that you haven’t thought of initially.

Tobias:

Hmm, also hacking on OpenSync/KitcheSync is much fun in general, the greatest moment was when the new KitchenSync frontend synced two directories via OpenSync the first time. But it was also cool when we managed to get the IrMC plugin working again after porting it to OpenSync.

As we now know the worst problem you faced and your greatest moment, the only one missing is: What was your weirdest experience while working on OpenSync?

Cornelius:

Not directly related to OpenSync, but pretty weird was meeting a co-worker at the Amsterdam airport when returning from the last OpenSync meeting. I don’t know how high the chance is to meet somebody you know on a big random airport not related at all to the places where you or the other person live, but it was quite surprising.

Tobias:

Since my favorite language is C++, I was always confused how people can use plain C for such a project, half the time your are busy with writing code for allocating/freeing memory areas. Nevertheless Armin did a great job and he is always a help for solving strange C problems 🙂

Now I’d like to move on to some more specific questions about current and planned abilities of OpenSync. As first, I’ve got a personal one:

I have an old iPod sitting around here. Can I or will I be able to use a program utilizing OpenSync to synchronize my calendars, contacts and music to it?

Cornelius:

I’m not aware of any iPod support for OpenSync up to now, but if it doesn’t exist yet, why not write it? OpenSync makes this easy. This is a chance for everybody with the personal desire to sync one device or another to get involved.

Armin:

I dont think that there is iPod support yet for OpenSync. But it would definitely be possible to use OpenSync for this task. So if someone would like to implement an iPod plugin, I would be glad to help 🙂

Which other devices do you already support?

Cornelius:

At this time, OpenSync supports Palms, SyncML and IrMC capable devices.

Which programs already implement OpenSync and where can we check back to find new additions?

Cornelius:

On the application side there is support for Evolution [GNOME] and Kontact with KitchenSync [KDE] on the frontend side and the backend side and some more. I expect that further applications will adopt OpenSync once the 1.0 version is released.

Armin:

Besides kitchensync there already are a command line tool and a port of the multisync GUI. Aside from the GUIs, I would really like to see OpenSync being used in other applications as well. One possibility for example would to be integrate OpenSync into Evolution to give users the possibility to synchronize their devices directly from this application. News can generally be found on the OpenSync web site www.opensync.org.

It is time to give the developers something to devour, too. I’ll keep this as a short twice-fold technical dive before coming to the takeoff question, even though I’m sure there’s information for a double-volume book on technical subleties.

As first dive: How did you integrate OpenSync in KitchenSync, viewed from the coding side?

Cornelius:

OpenSync provides a C interface. We wrapped this with a small C++ library and put KitchenSync on top. Due to the object oriented nature of the OpenSync interfaces this was quite easy.
Recently I also started to write a D-Bus frontend for OpenSync. This also is a nice way to integrate OpenSync which provides a wide variety of options regarding programming languages and system configurations.

And for the second, deeper dive:

Can you give us a quick outline of those inner workings of OpenSync, from the developers view, which make OpenSync especially viable for application in several different desktop environments?

Cornelius:

That’s really a question for Armin. For those who are interested I would recommend to have a look at the OpenSync website. There is a nice white paper about the internal structure and functionality of OpenSync.

Armin:

OpenSync consists of several parts:
First there is the plugin API which defines what functions a plugin has to implement so that OpenSync can dlopen() it. There are 2 types of plugins:
A sync plugin which can synchronize a certain device or application and which provides functions for the initialization, handling the connection to a device and reading and writing items. Then there is a format plugin which defines a format and how to convert, compare and detect it.
The next part is a set of helper functions which are provided to ease to programming of synchronization plugins. These helper functions include things like handling plugin config files, HashTables which can be used to detect changes in sets of items, functions to detect when a resync of devices is necessary etc.
The syncing logic itself resides in the sync engine, which is a separate part. The sync engine is responsible for deciding when to call the connect function of a plugin, when to read or write from it. The engine also takes care of invoking the format conversion functions so that each plugin gets the items in its required format.
If you want more information and details about the inner workings of OpenSync, you should really visit the opensync.org website or ask its developers.

To add some more spice for those of our readers, whose interest you just managed to spawn (or to skyrocket), please tell us where they can get more information on the OpenSync Framework, how they can best meet and help you and how they can help improving sync-support for KDE by helping OpenSync.

Cornelius:

Again, the OpenSync web site is the right source for information. Regarding the KDE side, the kde-pim@kde.org mailing list is probably the right address. At the moment the most important help would be everything which gets the OpenSync 1.0 release done.
[And even though] I already said it, it can’t be repeated too often: OpenSync will be the one unified syncing solution for the free desktop. Cross-device, cross-platform, cross-desktop.
It’s the first time I feel well when thinking about syncing 😉.

Armin:

Regarding OpenSync, the best places to ask would be the opensync mailing lists at sourceforge or the #opensync irc channel on the freenode.net servers.
There are always a lot of things where we could need a helping hand and where we would be really glad to get some help. So everyone who is interested in OpenSync is welcome to join.

Many thanks for your time!

Cornelius:

Thanks for doing the interview. It’s always fun to talk about OpenSync, because it’s really the right thing.

Armin:

Thank you for taking your time and doing this interview. I really appreciate your help!

Tobias:

Thanks for your work. Publication and marketing is something that is really missing in the open source community. We have nice software but nobody knows 😉

Further Information on OpenSync can be found on the OpenSync Website: www.opensync.org


This Interview was done by Arne Babenhauserheide in April 2006 via e-mail and KOffice on behalf of himself, the OpenSource Community, SpreadKDE.org and the Dot (dot.kde.org).It was first published on the Dot and is licensed under the cc-attribution-sharealike-license.A pdf-version with pictures can be found at opensync-interview.pdf (OpenDocument version: opensync-interview.odt)

This article features first-hand journalism by Wikinews members. See the collaboration page for more details.
This article features first-hand journalism by Wikinews members. See the collaboration page for more details.

Retrieved from “https://en.wikinews.org/w/index.php?title=OpenSync_Interview_-_syncing_on_the_free_desktop&oldid=4635201”

Car plows into crowd during Dutch Queen’s Day celebrations

Posted by: Adminin Uncategorized
12
Jan

Thursday, April 30, 2009

Five people have died and at least 13 are injured after a car plowed into a crowd in front of Het Loo Palace in Apeldoorn, the Netherlands during celebrations of Queen’s Day. At around 11:50 local time a black Suzuki Swift went through barriers erected to separate the onlooking crowd from traffic, subsequently striking a monument. Members of the Dutch royal family watched the incident take place from the open-topped bus. The incident was witnessed by many onlookers and photographers as well by media covering the pageant.

“He came out of nowhere and dragged ten to fifteen people. There is blood everywhere and people being resuscitated,” a photographer following the parade for De Telegraaf said.

At around 12:00, all official activities in Apeldoorn were cancelled. Other Dutch cities have also cancelled or scaled back activities, such as the Radio 538 concert in Amsterdam and all celebrations in Rotterdam. The mayor of Apeldoorn stated that, “A good day has ended as a drama.” Offical Flags throughout the Netherlands have been placed at half-mast. The Queen responded in a video speech and expressed her sympathy for the victims.

During a press conference held at 15:45, police reported that the man, who was still conscious but heavily injured after the accident, had told police that it was a deliberate act. It was also reported that the 38-year-old, a Dutch national, had not been in contact with the police until earlier that day when he was stopped at one of the barriers. He has no prior history of psychological problems and there are no indications that any sort of terrorist group was involved.

The Queen’s Day celebrations, observing the birthday of the Dutch monarch, take place annually on April 30. Citizens of the country traditionally celebrate by holding late-night markets and decorating the streets of the Netherlands in orange bunting, honoring the House of Orange.

Retrieved from “https://en.wikinews.org/w/index.php?title=Car_plows_into_crowd_during_Dutch_Queen%27s_Day_celebrations&oldid=815786”

Category:Music

Posted by: Adminin Uncategorized
12
Jan

This is the category for Music.

Refresh this list to see the latest articles.

  • 10 August 2022: Judith Durham, lead singer of The Seekers, dies at 79
  • 8 February 2022: Indian singer Lata Mangeshkar dies at age 92
  • 5 August 2021: DaBaby Levitating remix losing US radio audiences after the rapper’s comments on HIV/AIDS
  • 11 June 2021: Taylor Swift’s Evermore records biggest sales week of the year as it returns to No 1 on album chart
  • 27 May 2021: Olivia Rodrigo’s song good 4 u debuts at No 1 on US Billboard Hot 100 chart
  • 25 May 2021: ‘Rock and roll never dies’: Italy wins Eurovision after 30 years
  • 6 February 2021: Country singer Morgan Wallen’s recording contract cancelled following use of racial slur
  • 8 October 2020: Guitarist Eddie Van Halen dies, aged 65
  • 7 October 2019: Influential rock drummer Ginger Baker dies at age 80
  • 25 September 2019: Singer-songwriter Robert Hunter dies, aged 78
?Category:Music

You can also browse through all articles in this category alphabetically.

From Wikinews, the free news source you can write.


Sister projects
  • Wikibooks
  • Commons
  • Wikidata
  • Wikipedia
  • Wikiquote
  • Wikisource
  • Wiktionary
  • Wikiversity
  • Wikivoyage

Subcategories

Pages in category “Music”

(previous page) ()(previous page) ()

Media in category “Music”

Retrieved from “https://en.wikinews.org/w/index.php?title=Category:Music&oldid=4555110”

Apple announces new iPod range

Posted by: Adminin Uncategorized
9
Jan

Wednesday, September 5, 2007

Apple have released several re-designs of their popular iPod range. In addition to the iPod Classic, Nano and Shuffle, they have announced the brand new iPod touch, a media player which mimics the iPhone’s touch-screen capabilities.

The new iPod Classic design features a larger memory space of up to 160GB or 40,000 songs, and has a new all-metal design. The iPod nano is now smaller and squarer, adding video playback to its features for the first time. The 4GB model is cheaper than its predecessor at $149/£99, but the 8GB is available in five colours at $199/£129. The iPod Shuffle is identical in design to the previous model, but is now available in a new range of five colours, with the same price of $79/£49.

The iPod touch also features in-built wi-fi technology, enabling users to access the internet and download music from Apple’s market-leading on line iTunes music store to their handset. It was announced that Starbucks would offer free wi-fi access to all users of the iPod touch in its cafes. The screen layout, similar to that of the iPhone, offers access to music, video, photos and the iTunes store. There are currently two models, at 8GB and 16GB of memory capacity.

Apple CEO Steve Jobs also announced that the price of Apple’s iPhone, currently only on sale in the US, will be cut by $200 to $399. He described the new iPod range as ‘one of the seven wonders of the world’.

Retrieved from “https://en.wikinews.org/w/index.php?title=Apple_announces_new_iPod_range&oldid=1731685”

Wednesday, December 21, 2011

Former Salt Lake City mayor and human rights activist Rocky Anderson took some time to discuss his 2012 U.S. presidential campaign and the newly-created Justice Party with Wikinews reporter William S. Saturn.

Anderson served as mayor of Salt Lake City for eight years (2000–2008) as a member of the Democratic Party. During his tenure, he enacted proposals to reduce the city’s carbon emissions, reformed its criminal justice system, and positioned it as a leading sanctuary for refugees. After leaving office, Anderson grew critical of the Democratic Party’s failure to push for impeachment against President George W. Bush, and for not reversing policies on torture, taxes, and defense spending. He left the party earlier this year and announced that he would form a Third party.

Anderson officially established the Justice Party last week during a press conference in Washington D.C.. He proclaimed “We the people are powerful enough to end the perverse government-to-the-highest-bidder system sustained by the two dominant parties…We are here today for the sake of justice — social justice, environmental justice and economic justice.” The party promotes campaign finance reform and is attempting to appeal to the Occupy Wall Street movement. It is currently working on ballot access efforts, and will hold a Founding Convention in February 2012 in Salt Lake City.

Among other issues, Anderson discussed climate change, health care, education, and civil liberties. He detailed his successes as mayor of Salt Lake City, stressed the importance of executive experience, and expressed his views on President Barack Obama and some of the Republican Party presidential candidates. He spoke in depth about former Massachusetts governor Mitt Romney, with whom he worked during the 2002 Winter Olympics, and fellow Utahan, former governor and U.S. ambassador to China Jon Huntsman, Jr..

Retrieved from “https://en.wikinews.org/w/index.php?title=Wikinews_interviews_former_Salt_Lake_City_mayor_and_2012_presidential_candidate_Rocky_Anderson&oldid=4635257”

Wolfowitz picked for top spot at World Bank

Posted by: Adminin Uncategorized
2
Jan

Friday, March 18, 2005

The White House announced the selection of Paul Wolfowitz to head the World Bank, replacing John Wolfensohn who retires as acting president after 10 years. The switch is expected to occur sometime in June.

The choice of Wolfowitz is raising controversy in Europe and developing nations. Known as hawkish and outspoken, Wolfowitz was a pro-Iraqi war neo-conservative in his role as deputy Secretary of Defense, and a chief architect in the build up to war with Iraq. Some question whether Wolfowitz, who was criticized for brushing aside European and NATO calls for caution before the Iraq war, would use the International Monetary Fund (IMF) as tool to extend U.S. foreign policy interests.

Historically, it has been the White House’s prerogative to name the candidate because the U.S. holds a majority on the 24 member board, but board members from nations other than the U.S. are seeking their own interviews to qualify the candidate before a change is made. “The executive directors have agreed to conduct informal meetings over the coming days with the US nominee as part of the consultative process.” the IMF said in a statement. “Thereafter, the executive directors will meet in a formal session to select the president at which time an official announcement of the outcome will be made,” it said. The vote is set for March 31, the same day Wolfensohn retires.

Rob Nichols, the US Treasury spokesperson, said Wolfowitz has begun scheduling meetings with board members and that, “Our nominee… looks forward to meeting with and listening to members of the World Bank board.” Reuters reported. In the meantime, Wolfowitz has worked to assure those with concerns of him, saying he would come with an open mind and no political program.

Retrieved from “https://en.wikinews.org/w/index.php?title=Wolfowitz_picked_for_top_spot_at_World_Bank&oldid=684540”

Tanker truck fire causes collapse on Oakland Freeway

Posted by: Adminin Uncategorized
2
Jan

Sunday, April 29, 2007

A tanker truck carrying approximately 8,600 gallons of unleaded gasoline caught on fire on the Interstate 80/880 interchange in Oakland, California early Sunday morning around 3:40 AM. The fire resulted in the collapse of at least two sections of bridges at the interchange, including one carrying I-580. The multi-level freeway interchange known as the MacArthur Maze connects the Bay Bridge (Interstate 80) to Interstates 580, 880, and 980 and California State Highway 24, and as such it connects several major cities in California, including San Francisco, Oakland, and Berkeley.

The driver, James Mosqueda, 51, of Woodland, California, escaped from his truck before the fire. He was the only person reported to be hurt, suffering second-degree burns. No other vehicles were involved in the crash.

The driver was believed to be speeding, resulting in a loss of control of the truck, causing it to flip over and subsequently burst into flames. As the truck was traveling on the interchange of I-80 eastbound to I-880 southbound near the San Francisco Bay Bridge, it is speculated to have hit a guard rail or column during a turn. Shortly thereafter, it exploded into a fire that lasted several hours.

Caltrans officials have announced that repairs will be fast-tracked, but will still take several weeks. Public transit has responded with plans to increase service and re-route buses that used the destroyed interchange.

Gov. Schwarzenegger has declared a state of emergency that in addition to expediting repairs will suspend restrictions on truck traffic hours and provide free use of area public transportation on Monday, April 30.

Retrieved from “https://en.wikinews.org/w/index.php?title=Tanker_truck_fire_causes_collapse_on_Oakland_Freeway&oldid=4018703”

Copiapó, Chile mining accident: in depth

Posted by: Adminin Uncategorized
2
Jan

Wednesday, October 13, 2010

The rescue of the Chilean miners trapped in the San José Mine in Copiapó, codenamed Operación San Lorenzo (San Lorenzo Operation), began on Tuesday night, at around 20:00 local time (23:00 UTC).

Florencio Ávalos was the first miner to be rescued, at 00:12 local time (03:12 UTC) on Wednesday. He was wearing a shirt signed by all his fellow miners. “The first miner is already with us. We saw it all, him hugging his wife Monica and his son Byron,” said President Piñera shortly after the first rescue. “We still have a long journey.”

“This will be recorded on every single Chilean heart forever,” Piñera added. “I hope the miners’ hope stay with us, just like the [February] earthquake victims’ [hope] and what the earthquake took off. We know that the disasters unite us all.”

All the 33 miners were rescued. The last miner, Luis Urzúa, was rescued at 21:55 Chile time (00:55 UTC). “It is a pleasure to be Chilean, [I’m] proud,” said Luis Urzúa to President Piñera. “In honour of the miners, their families, the rescuers […] let’s sing our national anthem. Viva Chile Mierda!,” said Piñera. Urzúa thanked Mining Minister Golborne and the First Lady Cecilia Morel for “fighting for their lives.” “I’m proud of my fellow miners,” Urzúa added.

Six rescuers, including a miner and a paramedic, descended to the miners’ shelter using the Fénix 3 capsule which was specially constructed for the rescue. They performed check-ups and talk with the miners before taking them back to the surface. The rescuers still don’t leave the mine.

The Fénix 3 capsules are 3.95 metres in height and weigh about 460 kilograms. They have an armour, an oxygen tube and a microphone. The occupants helmets contain an intercom to keep them in contact with the rescue team on the surface.

President of Chile Piñera assisted to the rescue. Bolivian President Evo Morales could not attend Carlos Mamani’s rescue. Mamani is the only Bolivian miner in the group.

A mass for the miners was conducted at 18:00 local time (21:00 UTC). The rescue takes between 15 and 20 minutes for each miner.

On Tuesday, Mayor of Copiapó Maglio Cicardini announced that the municipal schools in the city will have no classes this Wednesday “to transform the rescue of the Atacama’s 33 in a familiar meeting,” Radio Cooperativa reported.

“The miners will be taken to the Copiapó Regional Hospital for medical checkup, where they will have to stay for 48 hours,” Health Minister Mañalich said to Televisión Nacional de Chile.

Celebrations are taking place in several Chilean cities. In Santiago de Chile, people gathered in one of the most important points of the city, Plaza Italia. In Pichilemu, tens of cars are passing over its most important streets. In Copiapó, people gathered in its main square to assist a massive concert.

On August 5, 33 miners were trapped more than 700 meters (2,300 ft) underground, in the San José copper–gold mine, located about 40 kilometers north of Copiapó, Chile.

The youngest trapped miner is 19 years old, and the oldest is 63. There were several rescue attempts before reaching the miners’ shelter on August 22. The National Emergencies Office of Chile (ONEMI) released a list of the trapped miners on August 6, which included Franklin Lobos Ramírez, a retired footballer.

Chile is the worlds top producer of copper, according to The Economist. The San José Mine is owned by the San Esteban Mining Company (Empresa Minera San Esteban). The mine was closed down in 2007, after relatives of a miner who had died sued the company executives, but the mine was re–opened in 2008.

It was originally estimated that “it would take three to four months to complete the rescue of the trapped miners”. There were three plans to reach the miners: “Plan A” using a Strata 950 drill, “Plan B” using a Schramm T130XD drill, and “Plan C” using a RIG-422 drill. The first to reach the miners was “Plan B”, early on Saturday 9.

The last step of their rescue, announced by Health Minister Jaime Mañalich, was originally due to begin on Tuesday. Laurence Golborne, Minery Minister said “If it is possible, and the cement sets before and we don’t have any impediments to doing it, it would be wonderful,” in a press conference on Monday. The men will be extracted in a steel rescue capsule 54 cm (21 inches) in diameter.

On September 4, Chilean filmmaker Rodrigo Ortúzar announced plans to film a movie about the accident, called “Los 33” (“The 33”). The film will be released in 2011.

One miner is Bolivian, and the other 32 are Chilean.

Raúl Bustos, 40 years old, is an hydraulics engineer. He left his job in Talcahuano after the February 27 earthquake to work in the mine.

Daniel Herrera, 27 years old, is a lorry driver. He has acted as paramedic assistant in the mine. He said to La Tercera “the miners were unhappy with the psychologist in the rescue team.”

Claudio Acuña, miner, is fan of the Colo-Colo football club. The BBC reports he is aged 56, but El Comercio says he is 44.

Pedro Cortez is aged 24. He joined the mine with his friend Carlos Bugueño. Cortez is an electrician, and lost a finger in the mine a year ago.

File:Juan Aguilar with President Piñera.jpg

A native of Los Lagos, Juan Aguilar is 49 years old. Aguilar is married to Cristy Coronado, according to El Comercio. Aguilar works as a supervisor.

Mario Sepúlveda is a 39 years old electrician native of Parral; he is married. He has been the spokesman of the most of the miners’ videos. Mario Sepúlveda was the second miner to be rescued, on Wednesday at 01:10 local time (04:10 UTC).

Víctor Zamora is a 33 years old auto mechanic. Zamora is married to Jéssica Cortez, who confirmed she was pregnant while he was in the mine.

Osman Araya is 30 years old, and married. He began working as miner four months before the accident.

Florencio Ávalos is 31 years old. He is the brother of Renán Ávalos, who is also trapped in the mine. He worked as driver in San José. Ávalos filmed videos, sent later to his relatives.

Ávalos was the first miner to be rescued, on Wednesday at 00:10 local time (03:10 UTC).

Jorge Galleguillos, 56 years old, has worked all his life in the mine. He said in one video he was feeling unwell; he takes medication for hypertension.

Carlos Barrios is a 27 years old miner. His father, Antenor Barrios, told Agence France-Presse: “I find he’s very strong and has enthusiasm. He spoke loud and clear. I was excited.”

Franklin Lobos Ramírez is a 53 years old retired footballer. He played for Cobresal, Deportes Antofagasta, Club de Deportes Santiago Wanderers and Unión La Calera, and briefly for the Chile national football team. Lobos had worked as a truck driver in the mine.

Yonni Barrios, called “The Doctor”, is a 50 years old electrician. He has knowledge of first aid, and was given responsibility for monitoring the health of his colleagues. “I felt I was in hell,” Barrios said in a letter to his wife.

Carlos Bugueño, 27 years old, joined the mine with Pedro Cortez. Previously, he worked as a watchman.

Alex Vega Salazar is a 31 years old heavy machinery mechanic. He is married to Jessica Salgado, and celebrated his birthday in the mine on September 22.

Ariel Ticona is a 29 years old miner. His wife, Margarita gave birth to his daughter on September 14. She was named Esperanza (Hope), at Ticona’s request.

Richard Villarroel is a 27 years old mechanic from Coyhaique.

Edison Peña is a 34 years old miner. “I want to go out soon,” he said on his first contact with his relatives. “I want to be free, I want to see the sun,” he added. He is a fan of Elvis Presley.

Claudio Yáñez is 34 years old, and works as drill operator.

José Ojeda, 46 years old, is the master driller. Ojeda is widowed and diabetic.

Luis Urzúa is a 54 year old topographer. He is the shift-leader, and was the first miner to talk with authorities. He is known as Don Lucho among the miners. He draw plans of the area of the mine where they are trapped.

Urzúa will be the last miner to leave the mine.

José Henríquez is a 54 years old drill master. He is also an evangelical preacher, and has worked in mines for 33 years.

Víctor Segovia is a 48 years old electrician. He is in charge of writing down everything that happens in the mine.

Pablo Rojas is a 45 years old explosives loader. Married, he had been working less than six months in the mine.

Juan Illanes is a 51 year old miner. He was a sergeant in the Beagle border conflict between Chile and Argentina in 1978, the incident which almost provoked a war between the countries.

Illanes was rescued on Wednesday, at 02:07 local time (05:07 UTC).

Jimmy Sánchez, 19, is the youngest miner. He had been working in the mine for five months before the accident. His role is to check the temperature and humidity in the mine.

Samuel Ávalos is a 43 years miner. His wife Ruth said “he was addicted to the cocaine.” His role in the rescue is to check air quality in the area the miners are living. According to the BBC, “Ávalos has worked in the mine for five months.”

Mario Gómez, aged 63, is the oldest of the miners. He has worked 51 years as miner. His father was also a miner, and is nicknamed “El Navegao” (“The Sailed One”). He was thinking of retiring in November.

Gómez also wrote the message “Estamos bien en el refugio los 33” (“We are fine in the shelter the 33 [of us]”).

Segovia is 48 years old. He is married to Jessica Chille, who said “To hear his voice was a confort to my heart,” after talking with him for the first time in 24 days. His sister María, was nicknamed “La Alcaldesa” (“The Mayoress”) for her leading role at Campamento Esperanza. His father, Darío Senior, was trapped in a mine for a week, and suffered serious injuries after two other mining accidents, according to the BBC.

Carlos Mamani is a 23 years old heavy equipment operator. He is also the only non-Chilean miner; Mamani is Bolivian. He began working in the mine just five days before the accident.

He was rescued at 03:11 local time (06:11 UTC) on Wednesday.

Renán Ávalos is a 29 years old miner, single, who had been working for five months in the mine before the accident. Florencio Ávalos is his brother.

Omar Reygadas is a 56 year old electrician. He began working in the mine shortly before the accident.

Esteban Rojas is a 44 years old miner. Rojas is married to Jessica Yáñez.

Retrieved from “https://en.wikinews.org/w/index.php?title=Copiapó,_Chile_mining_accident:_in_depth&oldid=1986972”